A TV stand helps place your television at the right viewing height, neatly organize cables, and create a comfortable viewing area without extra furniture or visual clutter. When assembled correctly, the stand will be stable and the screen will be securely mounted.
Installing a television stand yourself is usually straightforward: most models are designed for tool-free assembly, and the process typically takes 20-40 minutes. The main difficulty arises with large-screen TVs - in that case, it’s best to work with a second person.
What to Check Before Installing a TV Stand
Before you start, make sure to:
- Confirm TV compatibility with the TV mount stand (screen size, weight, and VESA mounting standard)
- Read the manufacturer’s manual
- Watch an assembly video if available - this makes the sequence clearer and helps avoid common mistakes
Installation Differences by TV Stand Type
- Floor TV stands without wheels are designed for stationary setup. Choose a location in advance and ensure the floor is flat and stable.
- Mobile TV stands with wheels are easy to move between rooms. Wheel locks help keep the stand firmly in place once positioned.
Tools You May Need
Most kits include:
- All required fasteners
- Allen (hex) keys for assembly
- A set of TV mounting screws for different TV models
Optional tools that can be helpful:
- A Phillips screwdriver
- A tape measure or long ruler (to set the screen at an exact height)
Step-by-Step TV Stand Installation
Step 1. Assemble the Base
Lay out the base parts on a flat surface and connect them according to the diagram. Tighten screws carefully - over-tightening can strip threads or cause the frame to warp.
For portable TV stands, install the wheels before attaching the column.
Step 2. Install the Column
Attach the column(s) to the base and make sure everything is straight. This is especially important for tall TV stands - proper alignment affects stability and how well height-adjustment mechanisms work.
Step 3. Mount the VESA Plate
Assemble the TV mounting bracket according to the instructions. If possible, set the approximate screen height now - this can save time later.
Step 4. Prepare the TV
Disconnect all cables and place the TV screen-down on a soft, clean surface. Attach the mounting rails and choose screws of the correct length and diameter from the kit.
If the VESA mounting holes are recessed, use the plastic spacers.
Step 5. Attach the TV to the Stand
This step is best done with two people, especially for larger TVs. Lift the TV and carefully hook it onto the mounting bracket. Make sure it fully seats into the mounting slots, then lock it in place with safety latches or fastening screws.
Step 6. Adjust the Viewing Position
After mounting, fine-tune the screen position:
- For home viewing, the center of the screen is typically at eye level when seated
- For meeting rooms and classrooms, consider the first-row sightline and overall viewing angles
Step 7. Manage the Cables
Route cables through built-in channels, guides, or clips. Leave a small amount of slack so cables won’t pull tight during height or tilt adjustments.
Post-Assembly Safety Check
After installation, verify that:
- The base sits evenly and all fasteners are tight
- The TV is stable and securely locked in place
- Shelf loads (if included) stay within the stand’s rated capacity
- Wheel locks work properly (for rolling TV stands)
Common Problems and Fixes
- The stand wobbles
Check that the base and column fasteners are fully tightened. Confirm the floor is level and – on wheeled TV carts - make sure the brakes are engaged. If the television stand is on carpet, move it to a harder surface if possible.
- The TV is not level
Inspect the rails on the back of the screen. Loosen the screws slightly, align the TV, then tighten again.
- The screen slowly drops or tilts
This usually happens when the locking mechanism isn’t tightened or the TV exceeds the stand’s weight rating. Recheck the stand specifications and tighten the locks or screws as instructed.
How to Move a Mobile TV Stand Safely
- Remove any extra equipment from shelves before moving
- Hold the stand by the column or handle, not by the TV
- Roll the TV cart smoothly - avoid sudden turns or jerky motion
Final Thoughts
Installing a stand for TV is a task most people can handle on their own - as long as you follow the instructions and do quick checks at each stage. A properly installed TV stand with mount improves stability, protects your equipment, and creates a comfortable viewing experience at home, in the office, or in public spaces.
If you run into questions during installation or need support, you can contact ONKRON customer service - our specialists can help you find the right solution and guide you through the setup.
